motors-techtop Techtop Motors

TEFC - CAST IRON

techtop-cast-iron
HP1 – 300
Poles 2, 4 & 6
Frame Size 143T- 449T
Number of Poles2 to 8
Voltages208-230/ 460V
RPM 1200/1800/3600
Body T / TC

Standard Features

  • IP 55 Protection
  • 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft (through 326T), 4140 (326T & up)
  • Multimount Removable Feet through 326T
  • One-Way Sintered Brass Condensate Drain
  • Corrosion Resistant Hardware
  • 1.25 Service Factor to 50HP (1.15 for larger frames)
  • Regreasable Bearings 254T & Larger
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seals
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertable (Shipped F1)
  • Class 1, Div 2, Groups A,B,C & D Certified
  • EISA Compliant
  • 36 Month Warranty

TEFC - ALUMINUM

techtop-aluminum
HP1 – 15
Poles2, 4 & 6
Frame Size143T- 215T
Voltage208-230/ 460V
RPM1200/1800/3600
BodyT / TC

Standard Features

  • IP 55 Protection
  • 50Hz Capable at 1.0 SF
  • 40°C Ambient Rating
  • Dual Oversized Bearings
  • 1045 Steel Shaft
  • Removable Feet
  • Tropicalization on Stator Winding
  • One-Way Sintered Brass Drain
  • Corrosion Resistant Hardware
  • Conduit Box is 90° Rotatable
  • Shielded Bearings
  • 1.25 Service Factor
  • Double Lip Oil Seals
  • Vacuum Impregnation
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertable ( Shipped F1)
  • Class 1, Division 2, Group C & D Compliant
  • 36 Month Warranty

OPEN DRIP PROOF

techtop-open-drip
HP1 – 150
Poles2 & 4
Frame Size143T- 445T
Voltage208-230/ 460V
RPM1800/3600
BodyT-Frame

Standard Features

  • IP 23 Rated
  • 40°C Ambient Rating
  • Double Lip Oil Seals
  • 1.25 SF up to 50HP ( 1.15 for larger frames )
  • Vacuum Impregnated Stator Winding
  • Corrosion Resistant Hardware
  • Tropicalization on Stator Winding
  • Inverter Rated (MG Part 31-15:1 Constant Torque)
  • 1045 Steel Shaft (through 326T), 4140 (360T and up)
  • Regreasable Bearings 254 Frame and Larger
  • Nipple Seals Between Conduit Box and Body
  • Rubber Slingers
  • Conduit Box is 90° Rotatable
  • Class H Insulation with Class F Stator
  • C & D Flanges Available
  • 36 Month Warranty

METRIC IEC

techtop-metrics-IEC

Standard Features

  • IP 23 Rated
  • 40°C Ambient Rating
  • Double Lip Oil Seals
  • 1.25 SF up to 50HP ( 1.15 for larger frames )
  • Vacuum Impregnated Stator Winding
  • Corrosion Resistant Hardware
  • Tropicalization on Stator Winding
  • Inverter Rated (MG Part 31-15:1 Constant Torque)
  • 1045 Steel Shaft (through 326T), 4140 (360T and up)
  • Regreasable Bearings 254 Frame and Larger
  • Nipple Seals Between Conduit Box and Body
  • Rubber Slingers
  • Conduit Box is 90° Rotatable
  • Class H Insulation with Class F Stator
  • C & D Flanges Available
  • 36 Month Warranty

3 PHASE - 56C FRAME

techtop-3PH-56c
HP1/3 – 3
Poles2 & 4
Frame Size56C
Voltage208-230/ 460V
RPM1800/3600
BodyC

Standard Features

  • TEFC Aluminum Body
  • IP 55 Protection
  • Multimount Removable Feet
  • 50/60 Hz Capable
  • One-Way Sintered Brass Condensate Drain
  • 1.15 Service Factor
  • Conduit Box is 90° Rotatable
  • Double Lip Oil Seals on both ends
  • Vacuum Impregnation
  • 9 Lead Dual Voltage
  • Drive End Bearing Locks
  • Class F Insulation System with Class H Stator
  • F1, F2, F0 Field Convertable (Shipped F1)
  • Designed to Class B Temperature Rise
  • 24 Month Warranty

High Torque Single Phase

techtop-high-torque
HP1/3 – 10
Poles4
Frame Size56 – 215T
Voltage115/208-230 (<145T)
208-230 (>182T)
RPM1800 (60 Hz)
BodyT / TC / RND

Standard Features

  • Manual Reset Protectors
  • High Efficiency Dual Cap Design
  • High Quality Molded Gaskets
  • Over 300% Starting Torque
  • Cast Iron End Bells
  • Dual Oversized Ball Bearings
  • Dependable Mechanical Starting Switch
  • 18 Month Warranty

IEEE 841 SEVERE DUTY

techtop-IEEE841
HP15 – 250
Poles2, 4 & 6
Frame Size254T – 449T
Voltage208-230/460V

Standard Features

  • TEFC IP 56 Protection
  • 40° Ambient Temp. Rating
  • Complete Cast-Iron Construction
  • 2-Part Epoxy Paint Protection
  • VPI with Tropicalization on Stator Windings
  • MG1 Part 31 – 15:1 Constant Torque
  • Dual Oversized Bearings on DE & ODE
  • INPRO Seals Installed on DE & ODE
  • Felt Wiper on Inner Bearing Retainer
  • Bearing Grease Chamber Pressure Relief Valve
  • Terminal Block for 3 Lead Connection
  • Removable Feet up to 326T Frame
  • Stainless Steel Hardware
  • 2-Part Epoxy Potted Conduit Box Entry
  • Regreasable Bearings 254 Frame & Larger
  • One-way Sintered Brass Condensate Drains
  • 1.25 Service Factor up to 50HP (1.15 for Larger Frames)
  • Available in F1, F2 & F0
  • C & D Flanges Available
  • Meets IEEE 841 Standards / IEEE 45 Marine Duty
  • Class F Insulation with “H” Class Stator
  • Class 1, Division 2, Groups A,B,C & D Compliant
  • 60 Month Warranty From Date of Shipment

HIGH SLIP DESIGN D

techtop-high-slip
HP3 – 125
Poles6
Frame Size213T – 445T
Voltage230/460/796V
RPM1200
BodyT-Frame

Standard Features

  • 5% – 8% Slip Design “D” Operation
  • Double Lip Oil Seals on Both Ends
  • Cast Iron Terminal Box with Gasket
  • Roller Bearing on 404T and Above
  • TEFC Cast Iron Frame
  • Corrosion Resistant Hardware
  • Vacuum Impregnated Stator
  • Mounting Position Convertible F1, F2, F3
  • Class F Insulation System, Class H Stator
  • Tropicalization on Stator Winding
  • One-Way Brass Condensation Drains
  • 24 Month Warranty from Date of Purchase

JM / JP PUMP MOTORS

techtop-jm-jp
HP1/3 – 50
Poles2 / 4
Frame Size56 – 326
Voltage208-230/460V
RPM1800/3600
BodyJ / JM / JP

Standard Features

  • IP 55 Rated
  • Continuous Duty
  • Dual Voltage
  • 1.15 Service Factor
  • 40°C Ambient Rating
  • Rubber Slingers
  • Double Lip Oil Seals
  • 1045 Carbon Steel Shafts
  • Dual Oversized Bearings
  • Vacuum Impregnated Stator
  • Multimount Removable Feet
  • Conduit Box is 90° Rotatable
  • Stainless Steel Nameplate
  • Tropicalization on Stator Winding
  • Shear Stabalized Polyurea Grease
  • One-Way Sintered Brass Condensate Drains
  • Regreasable Bearings 254 Frame & Larger
  • F1, F2, F3 Field Convertible (shipped F1)
  • Class H Insulated Stator with Class F Leads
  • Class 1, Div 2, Groups A, B, C & D Compliant
  • 24 Month Warranty

CRUSHER DUTY

techtop-crusher
HP75 – 250
Poles4 & 6
Frame Size365T – 449T
Voltage460V
RPM1200/1800
BodyT-Frame

Standard Features

  • NEMA Design C
  • 6 Lead – 460V
  • Drive-end Roller Bearing
  • 1.15 Service Factor
  • 40° C Ambient Temperature Rating
  • All Position Mounting Ready
  • Vacuum Impregnated Stator
  • Wye-Delta Start Wound
  • 4140 Carbon Steel Shaft
  • Bearing Grease Pressure Relief Valve
  • Full Cast Iron Construction
  • Double Lip Oil Seals on Both Ends
  • Rubber Slinger
  • Split Conduit Box is 90° Rotatable
  • F1 to F2 Field Convertible ( Shipped F1)
  • Shear Stabilized Polyurea Grease
  • Oversized Bearings on Both Ends
  • Class F Insulation with Class H Stator
  • EISA Compliant
  • 24 Month Warranty

Motor

Ready to get started?

Contact us with your information. Our team will provide you with a customized quote.

Contact Us

NEMA EASA IEEE