2000 Series Type X Purge System
The 2000 Series Type X Purge System is for use in Class I, Division 1 to non-hazardous area applications or Class II, Division 1 to non-hazardous area applications.
Our Pepperl+Fuchs Bebco EPS 2000 series, Type X purging system is an automatic system that will purge and pressurize the protected enclosure and maintain pressure within the enclosure. The 2000 series system reduces the classification within the protected enclosure from division 1 to non-hazardous. General-purpose equipment can be operated within the protected enclosure.
- UL, cUL and FM classified
- Conforms to NFPA 496 andISA 12.4 standards
- Enclosure volumes to 450 cu. Ft.
Type X systems model numbers – 2000 series
2001A: Class I Enclosure Volumes ≤ 2 ft3 and Class II Enclosure Volumes ≤ 10 ft3
2001B: Class II Enclosure Volumes ≤ 50 ft3
2001C: Class II Enclosure Volumes ≤ 250 ft3
2002: Class I Enclosure Volumes ≤ 15 ft3
2003: Class I Enclosure Volumes ≤ 75 ft3
2004: Class I Enclosure Volumes ≤ 200 ft3
2005: Class I Enclosure Volumes ≤ 450 ft3
6000 Series Type X Purge System
The Pepperl+Fuchs Bebco EPS 6000 series Type X/ Ex px purging system is a complete automatic system that will purge and pressurize the protected enclosure and maintain pressure within the enclosure.
Note: Vents are required for all 6000 series purging systems.
The 6000 series purge system reduces the classification within the protected enclosure from Zone 1 and 21 to non-hazardous area. General purpose equipment can be operated within the protected enclosure.
- Suitable for Class I and II, Division 1/ Zone 1 and Zone 21 to non-hazardous area applications
- Enclosure sizes up to 250 cubic ft. (7.01 cubic meters)
- The Type X/ Ex px system conforms to ATEX, NFPA 496 and ISA 12.4
- DEMKO, UL cULus, IEC Ex
Accessories for Type X purge system
Many of the Type X purge system models require a vent. Other type X purge system accessories may include:
- Cooler indicator gauge, higher pressure gauge
- Enclosure warning and enclosure temperature templates
- Conduit fitting kits
- Tubing and pipe connection fittings
- Surface and pipe mounting kits
- Enclosure connection kits and tamper-proof regulations
- Remote alarm horn and beacon devices
- In-Line filter and factory installed in-line filter kit
High Frequency Uras Vibrators
Specialized for precast concrete production, these Uras Vibrators produce high-frequency vibration.
Developed for use in production of precast concrete, the High-Frequency Uras Vibrator produces vibrations in the range of 100 to 180Hz. Concrete is strengthened through the use of high-frequency vibration during hardening. This technique can be applied to concrete casts of all types and sizes, for example tunnel shields or U-shapped gutters.
* A frequency drive is required to operate the High-Frequency Uras Vibrator.
Features:
- Produces vibrations in the range of 100 to 180Hz for the strengthening of precast concrete.
- Innovative anti-vibration construction allows for easy maintenance and provides a long service life without the need for periodic greasing.
- Compact design supports horizontal, diagonal, and vertical installation.
Flange Type Uras Vibrators
Ideal for use in circular screeners, a single Flange-Type Uras Vibrator is able to produce 3-dimensional vibration.
The Flange-Type Uras Vibrator was developed for use with circular screeners. The mass and relative angle of the upper and lower unbalanced weights can be adjusted to tune in the ideal 3-dimensional vibration for a circular screener or barrel polisher. The Flange-Type Uras Vibrator is also available with increased safety/explosion proof certification.
Features:
- A single unit can produce 3-dimensional vibration for a circular screener.
- Innovative anti-vibration construction allows for easy maintenance and provides a long service life.
- Small models don’t require periodic greasing.
- Available with increased safety/explosion proof certification.
