Century® offers an extensive line of Century® Farm-Rated® motors for farm equipment and many agricultural applications. Typical applications include fans and blowers, feed lot conveyors, liquid manure spreaders, unloaders, compressors, and storage bin conveyors.
Air-moving motors are available from 1/4 through 30 horsepower for applications including centrifugal fans and blowers, barn coolers, livestock and poultry house coolers, and aeration fans.
Another core component of the Farm Rated line is the 1/2, 3/4, and one horsepower motors offering providing dependable power for reversing feeders, door openers, gates and machine tools.
Heavy-duty applications are not excessive to Century Farm Rated motor capabilities with ball bearings lubricated with low temperatures grease; equipped to withstand high starting torque for harsh conditions. High-torque and extra-high-torque motors provide the extra start-up power for vacuum pumps, compressors, stock feeding conveyors, barn cleaners, silo unloaders, and other heavy-duty farm applications.
Century crop dryer motors are designed for tube axial orvane axial direct-drive dryers applications. Available in single or three-phase, open drip-proof or totally enclosed, these motors range from 5 through 14 horsepower.
Auger drive motors available from 1/3 through 1- 1/2 horsepower feature manual overloads for safety and high starting torque. Equipped with “N” flange mounting brackets, these auger motors are suited for direct-drive poultry and swine auger feeding systems.
Milk pump farm motors manufactured by Century have stainless steel shafts and weatherproof features for wash-down capabilities. These motors for milk transfer pumps are available in 1/2, 3/4, and one horsepower. Also available are Zero Milk Tank motors for direct replacement on Zero Milk Tanks.
Motors for grain stirring represent another component of the Farm Rated line. Featuring manual overload protectors and oversized ball bearings, these motors are moisture resistant for safety and longevity.
Century® offers motors designed for air compressor, pump and fan and blower duty applications which require high breakdown torque and rugged mechanical construction. These motors are designed as rolled steel construction, open drip proof enclosure.
- Designed for air compressor loads
- 2 Pole & 4 Pole Designs
- Single Phase – Rolled Steel
- Voltage Options: 115/230V – 208-230V – 230V
- Energy Efficient Design – Cap Start/Cap Run8
- Ball Bearings
- Rigid Base – Open Construction
- Manual Overload Protectors
DC NEMA Frame
High voltage permanent magnet DC motors are typically used with a thyristor controller in applications requiring adjustable speed and constant torque throughout the speed range. They are also widely used in applications requiring dynamic braking or adjustable speed / reversing capabilities.
- Low profile space-saving design
- Unique brush holder design provides easy access to brushes and integral constant pressure brush/spring assembly for servicing
- Large over-sized brushes assure longer brush life
- Heavy-duty, stamped steel, bolt-on base (removable)
- NEMA C face mounting at no additional cost
- Rugged die cast aluminum end shields with cast iron bearing inserts
- Permanently lubricated sealed ball bearings
Century® offers a variety of definite purpose motors like convection and pizza oven motors, submersible and belt drive elevator motors, high pressure washer motors, hot water circulatory pump motors, Nesbitt replacement motors, transformer cooling fan motors and vending machine motors. Century® offers motors designed for air compressor, pump and fan and blower duty applications which require high breakdown torque and rugged mechanical construction. These motors are designed as rolled steel construction, open drip proof enclosure.
Our extensive line includes motors for a variety of commercial and industrial applications.
General Purpose 48 & 56 Frame
Our extensive line includes motors for a variety of commercial and industrial applications in both single and three phase designs. Single phase designs include both economical split phase and capacitor start designs and capacitor start/capacitor run designs for higher efficiency.
Century® is known for our high quality pool and spa motors but we have so much more to offer for water systems applications. Our offering includes a wide range of pump motors for commercial and industrial applications, some of which include hot water circulator motors, carbonator pump motors, sump pump motors, general purpose C-face single phase motors, both C-face and square flange jet pump motors, NEMA C-face commercial pump motors and close coupled pump motors.
Three Phase Integral Horsepower
Our line of integral horsepower motors includes traditional T-frame ODP & TEFC designs as well as C-face footless with a round body, C-face footed, removable base C-face, multi-speed and severe duty. Efficiency ratings include EPACT and NEMA Premium designs.