motors-worldwide Worldwide Electric Company Motors

General Purpose - Rigid Base – Three-Phase

worldwide-GP-rigid
  • 1/3 – 2 HP
  • 1800 RPM
  • 208-230/460 and 575 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • Rigid base
  • Shaft slinger to keep moisture and contaminants from the drive-end bearing
  • Inverter duty
  • Suitable for 50HZ operation with 1.0 service factor

General Purpose - C-Face – Removable Base –Three-Phase

worldwide-GP-cface
  • 1/3 – 2 HP
  • 3600 and 1800 RPM
  • 208-230/460 and 575 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – removable base
  • Shaft slinger to keep moisture and contaminants from the drive-end bearing
  • Inverter duty
  • Suitable for 50HZ operation with 1.0 service factor

Jet Pump Motors – Three-Phase

worldwide-jet-3PH
  • 1/3 – 2 HP
  • 3600 RPM
  • 208-230/460 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – removable base
  • Threaded shaft
  • Shaft slinger to keep moisture and contaminants from the drive-end bearing
  • Inverter duty
  • Suitable for 50HZ operation with 1.0 service factor

Jet Pump Motors – Single-Phase

worldwide-jet-1PH
  • 1/3 – 2 HP
  • 3600 RPM
  • 115/208-230 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – removable base
  • Threaded shaft
  • Capacitor start / induction run (1/3 – 1 HP)
  • Capacitor start / capacitor run (1.5 – 2 HP) for reduced amperage and high torque
  • Automatic overload

Permanent Magnet DC Motors

worldwide-perm-magnet
  • 1/4 – 2 HP
  • 1800 RPM
  • 90, 180, 12 and 24 volt
  • TENV enclosure (1/4 – 1/2 HP)
  • TEFC enclosure (3/4 – 2 HP)
  • 1.0 service factor
  • Class F insulation
  • C-face – removable base
  • 20:1 speed range at constant torque
  • High starting torque
  • Extra set of brushes and brush springs included
  • 12 volt and 24 volt models used in applications where low voltage DC power is supplied by batteries or generators

Stainless Steel / Washdown Duty Motors – TEFC Enclosure

worldwide-SS-TEFC
  • 1/3 – 2 HP
  • 3600 and 1800 RPM
  • 208-230/460 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – rigid base and round body
  • Double lip seals on both ends of the motor with an additional shaft slinger on the drive-end
  • O-rings installed on endbells to eliminate moisture
  • Inverter duty
  • Suitable for 50 hz operation with 1.0 service factor

Stainless Steel / Washdown Duty Motors – TENV Enclosure

worldwide-SS-TENV
  • 1/3 – 2 HP
  • 3600 and 1800 RPM
  • 208-230/460 volt
  • TENV enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – rigid base and round body
  • Double with an additional shaft slinger on the drive-end
  • O-rings installed on endbells to eliminate moisture
  • Inverter duty
  • Suitable for 50 hz operation with 1.0 service factor

Premium Efficiency Motors-Rigid Base

worldwide-PEM-rigid
  • 1-500 HP
  • 3600, 1800, 1200 and 900 RPM
  • 208-230/460 volt (1-200 HP)
  • 460 volt (250-500 HP)
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • Rigid base
  • Premium efficiency (1-200 HP, 3600, 1800 and 1200 RPM)
  • EISA-Compliant – high efficiency (1-200 HP, 900 RPM and 250-500 HP)
  • Inverter ready, 4:1 CT / 10:1 VT (1-200 HP, 3600, 1800and 1200 RPM)
  • Suitable for 50 hz operation with 1.0 service factor (1-150 HP)

Premium Efficiency Motors-C-Face-Rigid Base

worldwide-PEM-cface
  • 1-300 HP
  • 3600, 1800 and 1200 RPM
  • 208-230/460 volt (1-200 HP)
  • 460 volt (250-300 HP)
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – rigid base
  • Premium efficiency (1-200 HP)
  • EISA-Compliant – high efficiency (250-300 HP)
  • Inverter ready, 4:1 CT / 10:1 VT (1-200 HP)
  • Suitable for 50 hz operation with 1.0 service factor (1-150 HP)

Close Coupled Pump Motors

worldwide-cc-pump
  • 1-50 HP
  • 3600 and 1800 RPM
  • 208-230/460 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – rigid base
  • EISA-Compliant – high efficiency
  • Suitable for 50 hz operation with 1.0 service factor

Oil Well Pump Motors

worldwide-oil-well
  • 3-100 HP
  • 1200 RPM
  • 230/460/796 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • Rigid base
  • EISA-Compliant – high efficiency
  • NEMA Design D – high slip
  • Suitable for 50 hz operation with 1.0 service factor

Advanced Design Rock Crusher Motors

worldwide-adv-rockcrush
  • 100-500 HP
  • 1800 and 1200 RPM
  • 208-230/460 volt (100 – 200 HP)
  • 460 volt (250 – 500 HP)
  • TEFC enclosure (IP55 enclosure for WWHT models)
  • 1.15 service factor
  • Class F insulation
  • Rigid base
  • EISA-Compliant – high efficiency
  • NEMA Design D – high torque (WWHT models only)
  • VFD rated 4:1 CT / 10:1 VT PWM type (WWHT models only)
  • Suitable for 50 hz operation with 1.0 service factor (100 – 150 HP)

Motor

Ready to get started?

Contact us with your information. Our team will provide you with a customized quote.

Contact Us

NEMA EASA IEEE