Elektrim® NEMA Premium 20N Series Performance Motors
A New Standard for Unwavering Dependability in Demanding Conditions
1-250 HP 3PH TEFC 60 Hz NEMA AC Foot Mounted and C-Face Motors
Features
- Inverter Duty Rated: 10:1CT & 20:1VT
- Service Factor: up to 1.40
- Design: “B” or “A”
- Protection Degree: IP55
- Enclosure: TEFC Rigid Cast Iron Frame
- Warranty: 3-Years
- High locked rotor torque
- VPI applied for best electrical performance
- Oversized ball bearings on both ends
- Designed for horizontal and vertical application
- 230/460V 60Hz, usable at 208V 60Hz (up to and including 100HP)
- 460V 60Hz double delta (125HP and up)
- Double rated for 190/380V 50Hz
- Class “F” insulation with rise below Class “B”
- Impregnation resin and winding
- Wire Class “H” (DN2E200)
- F1 / F2 Convertible up to 286T frame
- Low vibration level (below 2.2 mm/sec)
- CSA-US certified, DOE approved
- CE and NEMA Premium® marked
Elektrim® Performance 20 Series Premium Efficient motors are the premier, top-of-the-line European designed and manufactured motor in the marketplace and are built to withstand the most-extreme applications. With its uniquely high service factor (up to 1.4), Elektrim® Performance Series motors deliver worry-free starts under excessive load or poor supply conditions. Added performance enhancing-features such as more durable oversized bearings on both ends, high lock rotor torque, heat dissipating vacuum pressure impregnation, and dual-rating at 60/50 Hz without de-rating have earned Elektrim® Performance Series motors its place as one of the best, pound for pound, motors in the industry.
Elektrim® NEMA Premium 31N Series All Purpose Motors
Peace-of-Mind Performance in Gas Environments and UL Recognized for Safety
1-50 HP 3PH TEFC 60 Hz NEMA AC Foot Mounted and C-Face Motors
Features
- Class I, Division II Group A,B,C,D Temp Code T3C
- Inverter Duty Rated: 10:1CT & 100:1VT
- Service Factor: up to 1.25
- Design: “B”
- Protection Degree: IP55
- Enclosure: TEFC Rigid Cast Iron Frame
- Warranty: 3-Years
- High locked rotor torque
- 230/460V 60Hz, usable at 208V 60Hz Double rated for 190/380V 50Hz
- Motors 213T and larger suitable for Y/delta starting and part winding starting
- Class “F” insulation with rise below Class “B”
- F1 / F2 Convertible
- CSA-US certified, UL Recognized, DOE Approved, CE and NEMA Premium marked
Elektrim® All-Purpose Premium Efficient motors are ideal for a wide variety of industrial applications including fans and blowers, pumps, conveyors, crushers, compressors, mixers and more. Inverter duty rated with a high service factor (up to 1.25), IP55 protection, a TEFC rigid cast iron construction, and dual rated 190/380V 50Hz with a 3-year warranty, Elektrim® All-Purpose motors provide peace-of-mind performance in typical applications.
Elektrim® NEMA Premium Severe Duty Motors
Extra Strong Super Resilient Performance in Tough Applications and Environments
1-250 HP 3PH TEFC 60 Hz NEMA AC Foot Mounted and C-Face Motors
Features
- Ultra-strong oversized ball bearings on both ends for extra strength and durability
- High starting torque
- High service factor up to 1.4
- IP55 water-tight and dust-proof TEFC enclosure
- Moisture resistant tropicalization
- High temperature protected Class H wiring
- Cast iron construction including junction box, end brackets and fan guard (double gauge reinforced steel fan guard 320T and up for reduced weight and increased air flow)
- Vacuum pressure impregnation for the most dependable failsafe electrical performance
- Low vibration level (below 0.08 in/sec)
- Inverter duty rated 10:1CT and 20:1VT
- V- Ring up to 286T
- Labyrinth seal 324T and up
- High temperature grease
- 213T and larger suitable for wye/delta starting
- Designed for horizontal and vertical application
- CSA-US certified, DOE approved, CE and NEMA Premium marked
- 3-Year warranty
Elektrim® Severe Duty Premium Efficient motors provide built-for-life reliability in the harsh hard-wearing applications found in petrochemical plants, refineries, tropical climates, mines, foundries, pulp and paper mills, waste management facilities, quarries and processing factories. With its ultra-strong oversized bearings, labyrinth seal (324T and up), high starting torque and uniquely high service factor (up to 1.4), Elektrim® Severe Duty motors guarantee rugged mechanical strength and optimum performance in the worst conditions.
Elektrim® Single and Three Phase 56C Rolled Steel Motors
Reliable, Long-Lasting and Compact Motor Muscle for Home and Industry
1/3-3 HP 1PH & 3PH TEFC 60 Hz NEMA AC Foot Mounted and Round Body C-Face Motors
Features
- Inverter Duty Rated: 3:1CT & 5:1VT (3-Phase only)
- Service Factor: 1.15
- Design: “B”
- Protection Degree: IP55
- Enclosure: TEFC F1 mount
- Warranty: 1-Year
- C-Face with and without feet
- High starting torque
- 3-Phase 208-230/460V
- 3-Phase 380V 50Hz with lower HP output
- 1-Phase 115/230V
- 1-Phase available with and without thermal protection and manual reset
- Rolled steel NEMA frame 56C
- Aluminum alloy cast C-Face
- CSA-US certified and CE marked
Elektrim® 56C Frame motors are an energy-saving, continuous duty TEFC commercial motor designed for the user who requires good quality performance for home and/or light industries. Available with and without thermal protection & manual reset, c-face footed or c-face footless mounting and in 1PH or 3PH, Elektrim® 56C Frame motors feature a high starting torque, 1.15 service factor, IP55 protection and 1-year warranty. Three phase Elektrim® 56C motors are also Inverter Duty Rated 3:1 CT & 5:1 VT.
Elektrim® High Torque Single Phase Rolled Steel Motors
Engineered for Tough-to-Handle High Torque Applications and Environments
3-10 HP 1PH TEFC 60 Hz NEMA AC Foot Mounted and C-Face Motors
Features
- High starting torque
- Service Factor: up to 1.15
- Design: “L”
- Protection Degree: IP55
- Enclosure: TEFC rolled steel NEMA frame
- Vacuum pressure impregnation (VPI) for the most dependable failsafe electrical performance
- Oversized ball bearings
- F1 foot mount assembly with or without C-Face
- 1-Phase 208-230/460V 60Hz
- Shaft V-ring seals
- Rolled steel construction with cast iron end plates
- Outdoor usable
- Start and run capacitors standard
- Corrosion resistant epoxy coated
- Condensation drains
- CSA-US certified
- Replacement parts available
- Warranty: 1-Year
Elektrim® High Torque Single Phase electric motors are designed to withstand the rigors of heavy duty agricultural applications such as grain augers, barn cleaners, bulk feeders and silo unloaders, but also work excellently in other applications such as air compressors, pumps and other single phase machinery. With its high starting torque, full load starts in tough conditions are guaranteed. Cast iron end plates havebeen added for extra durability and lower motor vibration, while its IP55 protection, VPI winding protection, corrosion resistant epoxy coating, and shaft V-ring seal ensure safe operation outdoors by protecting the motor from dust and moisture. The motors is even rated 230V and 460V single phase for additional application versatility. A full line of C-Face motors, C-Face kits, and replacement parts are also available.
Elektrim® NEMA Premium JM/JP Close Coupled Pump Motors
Powerful Pump Action Performance for Fluid Handling Applications
1-60 HP 3PH TEFC 60 Hz NEMA AC Foot Mounted C-Face Motors
Features
- Inverter Duty Rated: 20:1VT
- Service Factor: up to 1.4
- Design: “B” or “A”
- Protection Degree: IP55
- Enclosure: TEFC Rigid Cast Iron Frame
- Warranty: 3-Years
- High locked rotor torque
- VPI applied for best electrical performance
- 230/460V 60Hz, usable at 208V 60Hz
- Double rated for 190/380V 50Hz
- Oversized double-shielded bearings
- Mechanically locked on shaft
- Motors 213JM/JP and larger suitable for Y/D starting at both 460V and 230V
- Class “F” insulation with rise below Class “B”
- Steel Fan Guard
- Designed for horizontal and vertical application
- F1 / F2 Convertible up to 286JM/JP frame
- CSA-US certified, DOE approved, CE and NEMA
- Premium marked
Elektrim® JM and JP close-coupled pump TEFC electric motors are designed for continuous duty fluid circulation and transfer applications ranging from treatment plants to swimming pools. Unique to the Elektrim® marketplace, Elektrim® close coupled pump motors feature a high service factor (up to 1.4) which more effectively allows pumps to start under excessive load or poor supply conditions. Elektrim® JM and JP electric motors are also equipped with oversized double-shielded bearings on both ends, vacuum pressure impregnation, IP55 protection and a 3-year warranty.
Elektrim® 56C and Premium TC Frame Stainless Steel Motors
Remarkable All-In-One Wet and Corrosive Washdown Protection
1/3-30 HP 1PH & 3PH TEFC 60 Hz NEMA AC Foot Mounted and Round Body C-Face Motors
Features
- Inverter Duty Rated: 3:1CT & 5:1VT (3-Phase only)
- Service Factor: 1.15
- Design: “B” or “C”
- Protection Degree: IP56 (56C), IP55 (TC-Frame)
- Enclosure: F1 Mount TEFC or TENV (fractional 3PH)
- Warranty: 1-Year
- C-Face with and without feet
- 300 series stainless steel construction
- Class “F” insulation with rise below Class “B”
- 3-Phase 208-230/460V
- 1-Phase 115/230V
- Sealed bearings and squirrel cage rotor
- 12-gauge puddle welded base on footed motors
- Anti-corrosion coating applied
- DE and NDE drain holes every 90°
- CSA-US certified and CE marked
- Premium motors DOE approved
Elektrim® Stainless Steel continuous duty motors are designed to meet the severe-duty sanitation requirements for food-grade and high pressure wash down applications. Available in 56C (1PH or 3PH) or TC-Frame sizes, Elektrim® Stainless Steel motors feature a 1.15 service factor, IP55 or IP56 degree of protection, interior anti-corrosion resistant coated, and are 100% TEFC or TENV 300 series stainless steel constructed for pharmaceutical, food and beverage processing and packaging industries. Additional motors from 15-30HP may also be available in limited supply or by special order.
Elektrim® Crusher Series Motors
Robust Unshakable Performance for Unrelenting, Continuous Operation
150-600 HP 3PH TEFC 60 Hz NEMA AC Foot Mounted Motors
Features
- Inverter Duty Rated: 5:1CT & 10:1VT
- Service Factor: up to 1.20
- Design: High Starting Torque
- Protection Degree: IP55
- Enclosure: TEFC 200 grade cast iron frame and brackets
- Warranty: 3-Years
- 460V 60Hz double delta, double rated for 380V 50Hz at lower HP output
- Roller bearing on DE side for belt drive applications
- 4140 equivalent steel shaft
- Unibody design
- Vacuum Pressure Impregnation (VPI) for best electrical performance
- Class “F” insulation with Class “B” rise
- 12 leads out
- Large junction box
- Thermistors and space heaters standard (449T and up)
- Suitable for Y/delta starting and part winding starting
- Designed for horizontal application
- F1 / F2 convertible up to 449T frame
- CSA-US certified and CE marked
Elektrim® Crusher Duty electric motors are designed for the most extreme aggregate industry applications. Standard features include high torque Design “C”, 4140 reinforced steel shaft, and vacuum pressure impregnation offer increased motor life while decreasing electrical failure. In addition, Elektrim® Crusher Duty electric motors are protected with a 3-year warranty, are inverter rated 5:1CT and 10:1VT for versatility in VFD and soft start applications, utilize an oversized roller bearing on the drive-end, and have thermistors as standard for built-in thermal protection (449T and up). A huge junction box and 200-grade severe-duty cast iron construction let these electric motors withstand some of the most rugged conditions.
Elektrim® Metric IEC Frame Motors
Solid Severe Duty Motors for Export and Overseas Applications
0.08-150 HP 3PH TEFC 60/50 Hz NEMA AC Foot Mounted, D-Flange and C-Face Motors
Features
- Comply with EISA 2007
- High locked rotor torque
- Inverter Duty Rated: 5:1CT & 10:1VT (at 460V 60Hz)
- Protection Degree: IP55
- Enclosure: TEFC F3 Rigid Cast Iron Frame
- Warranty: 3-Years
- Electromagnetic compatibility standards: EN 50081-1(2) and EN 50082-1(2)
- 56-132 frame have removable feet
- 90-112 frame motors have rotatable feet
- Terminal board standard up to and including IEC112
- VPI process applied for best electrical performance
- Oversized ball bearings on both ends: Double shielded up to
- IEC180, regreasable IEC200 and up
- Aluminum motor housing up to IEC112, cast iron above
- Nameplate rated 230/460V 60 Hz and 380/400V 50 Hz
- 132 frame and up are 12 lead motors allowing for 60 Hz 208/230/460/575/796V and 50 Hz 190/220/380/400/415/690V
- Class “F” insulation
- Drilled and tapped end shaft
- All motors provided with CE mark
Elektrim® IEC Frame Metric motors are designed to meet international standards (including EISA2007 and IE2 efficiency requirements) and are “the” replacement motors for overseas applications and machinery components. Dual rated 60/50Hz from stock, Elektrim® IEC frame motors offer vacuum pressure impregnation for optimal electrical performance, oversized bearings on both ends for direct coupling, IP55 protection, and are backed by a 3-year warranty. Select from B3, B35, B34 or B34/1 mounting to replace or import in a variety of applications from pumps, conveyors, fans and more. Larger Elektrim® Metric Motors, up to 4000HP, are also available upon request.
Elektrim® Motors
Features
- Comply with EISA 2007
- High locked rotor torque
- Inverter Duty Rated: 5:1CT & 10:1VT (at 460V 60Hz)
- Protection Degree: IP55
- Enclosure: TEFC F3 Rigid Cast Iron Frame
- Warranty: 3-Years
- Electromagnetic compatibility standards: EN 50081-1(2) and EN 50082-1(2)
- 56-132 frame have removable feet
- 90-112 frame motors have rotatable feet
- Terminal board standard up to and including IEC112
- VPI process applied for best electrical performance
- Oversized ball bearings on both ends: Double shielded up to
- IEC180, regreasable IEC200 and up
- Aluminum motor housing up to IEC112, cast iron above
- Nameplate rated 230/460V 60 Hz and 380/400V 50 Hz
- 132 frame and up are 12 lead motors allowing for 60 Hz 208/230/460/575/796V and 50 Hz 190/220/380/400/415/690V
- Class “F” insulation
- Drilled and tapped end shaft
- All motors provided with CE mark